Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2022-04-01 07:22:27

Pebrok
Contributor
Registered: 2022-01-30
Posts: 4

How to clone a Hexact badge on a CUID card

Hi,
I'm a bit new to all this, but very interested.
I have Proxmark3 Easy and an ACR122U.

I'm desperately trying to clone my building badge (Vigik Mifare Hexact 13.56Mhz badge), but even when the dumps are completely identical, the clone is not even detected by the building reader... (it was detected _red light_ when virgin).
I am using a CUID badge, because the UID badge was not detected either.

What am I doing wrong, and what should I do?

Thanks for the help.

Pebrok

Offline

Board footer

Powered by FluxBB