Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2021-05-27 07:54:58
- ImpulsiveJames
- Contributor
- Registered: 2021-05-27
- Posts: 1
Hi, New to RFID and quick question
Hi, I got a T5577 / NTAG216 implant last year and have been learning more and more about the technology since then.
I just finally got my ProxMark3 Easy up an running (omg, what a pain, had to short pin 55 to 3.3v to disable the security features), I scanned two of the badges I had laying around, but one of the cards isn't decoding correctly, just wanted to post here and see if anyone had any ideas.
[=] Checking for known tags…
[=]
[+] [C15001 ] HID KeyScan 36-bit FC: 129 CN: 9752 OEM: 704 parity ( fail )
[+] [S12906 ] HID Simplex 36-bit FC: 176 CN: 8463896 Issue: 0 parity ( fail )
[+] [Sie36 ] HID 36-bit Siemens FC: 180353 CN: 9752 parity ( fail )
[=] found 3 matching formats
[+] DemodBuffer:
[+] 1D555AA69556555965A55A55
[=] raw: 000000000000003d81024c30
[+] Valid HID Prox ID found!
[=] Couldn’t identify a chipset
Card Number is 18822
Thanks!!
Offline
#2 2021-06-19 17:05:31
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,511
- Website
Re: Hi, New to RFID and quick question
Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.
Your access rights has been updated.
Offline
Pages: 1
Topic closed