Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-05-12 18:33:44

ddexdd
Contributor
Registered: 2021-03-16
Posts: 3

personalize setting error

Just wanted to post a minor edit that needs to be made to the examples/notes: that come up with the help command for hf mf personalize are missing the extra dash "-".  When I add extra "-" the comand runs fine, just a typo or omissioin given in the help.


[usb] pm3 --> hf mf personalize -h

Personalize the UID of a MIFARE Classic EV1 card. This is only possible
if it is a 7Byte UID card and if it is not already personalized.

usage:
    hf mf personalize [-hab] [-k <hex>] [--f0] [--f1] [--f2] [--f3]

options:
    -h, --help                     This help
    -a                             use key A to authenticate sector 0 (def)
    -b                             use key B to authenticate sector 0
    -k, --key <hex>                key (def FFFFFFFFFFFF)
    --f0                           UIDFO, double size UID
    --f1                           UIDF1, double size UID, optional usage of selection process shortcut
    --f2                           UIDF2, single size random ID
    --f3                           UIDF3, single size NUID

examples/notes:
    hf mf personalize -f0                         -> double size UID
    hf mf personalize -f1                         -> double size UID, optional usage of selection process shortcut
    hf mf personalize -f2                         -> single size random ID
    hf mf personalize -f3                         -> single size NUID
    hf mf personalize -b -k B0B1B2B3B4B5 -f3      -> use key B = 0xB0B1B2B3B4B5

Offline

#2 2021-05-20 17:52:16

ddexdd
Contributor
Registered: 2021-03-16
Posts: 3

Re: personalize setting error

Thanks for updating Proxmark3 application and firmware.

Offline

#3 2021-05-21 04:07:36

yukihama
Contributor
Registered: 2018-05-13
Posts: 133

Re: personalize setting error

hf mf personalize  what is this for?

Offline

Board footer

Powered by FluxBB