Proxmark3 community

amigu

Member

Registered: 2011-06-22

Posts: 5

write failed: usb_reap: timeout error!

Hello,

I have this problem. I flashed my Proxmark a couple of times yesterday and they were all fine (version 486). And then when I tried to flash it again, it came with the error:

$ flasher.exe C:/ProxSpace_new/pm3/armsrc/obj/fullimage.elf
Loading ELF file 'C:/ProxSpace_new/pm3/armsrc/obj/fullimage.elf'...
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x0000a4bc->0x0000a4bc) [R  ] @0xb4
1: V 0x00110000 P 0x00110000 (0x00010494->0x00010494) [R X] @0xa570
2: V 0x00200000 P 0x00120494 (0x00001bb8->0x00001bb8) [RWX] @0x1aa08
Note: Extending previous segment from 0x10494 to 0x1204c bytes

Waiting for Proxmark to appear on USB...
Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
Found.
Entering bootloader...
write failed: usb_reap: timeout error!
Trying to reopen device...

Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> Press and hold down button NOW if your bootloader requires it.
Waiting for Proxmark to reappear on USB...
Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
Found.
Note: Your bootloader does not understand the new START_FLASH command
      It is recommended that you update your bootloader

Flashing...
Writing segments for file: C:/ProxSpace_new/pm3/armsrc/obj/fullimage.elf
0x00102000..0x0010c4bb [0xa4bc / 165 blocks]write failed: usb_reap: timeout er
or!
Trying to reopen device...

Connected units:
        1. SN: ChangeMe [bus-0/\\.\libusb0-0001--0x9ac4-0x4b8f]
proxmark3> ReceiveCommandPoll returned 0
Error: Unexpected reply 0x0000 (expected ACK)
ERROR
Error writing block 0 of 165

Then I tried to re-flash the bootloader as the output suggested. It came with the same error "write failed: usb_reap: timeout error!". It looks like a USB problem. I am not sure if I damaged the firmware or how to solve this problem. Can anyone please let me know?

Thanks!

vivat

Contributor

Registered: 2010-10-26

Posts: 332

Re: write failed: usb_reap: timeout error!

I think that you have damaged your bootloader. Try to re-flash it using Wiggler JTAG. You can find it's schematics on this forum.