Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2018-12-08 11:56:56

ccdfun
Contributor
Registered: 2017-11-23
Posts: 5

Can i restore data onto the Indala tag?

I cloned a Indala tag onto two HID and t5577 fobs. I ran SEARCH LF on the original tag and it output the following

proxmark3> lf search
#db# Sampling config:                  
#db#   [q] divisor:           95                  
#db#   [b] bps:               8                  
#db#   [d] decimation:        1                  
#db#   [a] averaging:         1                  
#db#   [t] trigger threshold: 0                  
#db# Done, saved 30000 out of 30000 seen samples at 8 bits/sample                 
#db# buffer samples: 69 67 76 7f 87 8a 8c 8c ...                 
Reading 20000 bytes from device memory
          
Data fetched          
Samples @ 8 bits/smpl, decimation 1:1           
NOTE: some demods output possible binary
  if it finds something that looks like a tag          
False Positives ARE possible


Checking for known tags:
          
BitLen: 29          
Indala UID=00000000000000000000000000000 (0000000000000000000000000000000000000000000000000)          

Valid Indala ID Found! 

I ran SEARCH LF on the cloned tag and it read the following:

proxmark3> lf search
#db# Sampling config:                  
#db#   [q] divisor:           95                  
#db#   [b] bps:               8                  
#db#   [d] decimation:        1                  
#db#   [a] averaging:         1                  
#db#   [t] trigger threshold: 0                  
#db# Done, saved 30000 out of 30000 seen samples at 8 bits/sample                 
#db# buffer samples: 03 32 8d cc f5 ab 6b 33 ...                 
Reading 20000 bytes from device memory
          
Data fetched          
Samples @ 8 bits/smpl, decimation 1:1           
NOTE: some demods output possible binary
  if it finds something that looks like a tag          
False Positives ARE possible
          

Checking for known tags:
          
HID Prox TAG ID: 801a881f3b (4185) - Format Len: 37bit - FC: 424 - Card: 262629          

Valid HID Prox ID Found!   

Then i accidentally hit the clone button again while I had the Indala tag on the Proxmark device. As a result the indala tag was written as the HID card i just cloned out of the Indala tag.

My questions are:
- Are there any options to restore the Indala tag?
- Is there any difference for having the Indala tag now programmed as a HID tag given they both work at the door?

Last edited by ccdfun (2018-12-08 11:57:37)

Offline

Board footer

Powered by FluxBB