Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2017-04-24 14:35:34

iceman
Administrator
Registered: 2013-04-25
Posts: 4,626
Website

Source code Proxmark3 GUI by Gaucho

I have uploaded my latest version of the proxmark3 GUI by Gaucho and other good tools here: http://www.icedev.se/pm3.aspx


direct download link: Proxmark3 GUI v.1.1


冰人
modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Nothing says thank you as much as a donation!

Offline

#2 2017-04-24 16:13:07

ntk
Contributor
Registered: 2015-05-24
Posts: 701

Re: Source code Proxmark3 GUI by Gaucho

Congratulation and mucho mucho thank you ...

I have download the GUI source can wait to learn new thing and can only say what an awesome island  you have there at  http://www.icedev.se/pm3.aspx with so much of treasures....


modhex(ichbifhkhghuhehghkiehbihhkidifighgebecedfchihthbhkhrduhehvht)

Offline

#3 2017-04-24 17:14:37

iceman
Administrator
Registered: 2013-04-25
Posts: 4,626
Website

Re: Source code Proxmark3 GUI by Gaucho

yes, one of these days your tests will be there aswell...


冰人
modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Nothing says thank you as much as a donation!

Offline

#4 2018-05-05 21:28:34

gerza
Contributor
Registered: 2018-05-05
Posts: 5

Re: Source code Proxmark3 GUI by Gaucho

There is not a gaucho compiled gui for windows updated. I try old 2013 version but don't work with last iceman fork

¿are plans of compile and update windows gui for last iceman fork?

Offline

#5 2018-05-16 08:30:22

Elsin10
Contributor
Registered: 2018-02-27
Posts: 11

Re: Source code Proxmark3 GUI by Gaucho

gerza wrote:

There is not a gaucho compiled gui for windows updated. I try old 2013 version but don't work with last iceman fork

¿are plans of compile and update windows gui for last iceman fork?

Sorry to ask this but what is this "fork" ? Totally new at this. I'm learning.

Offline

#6 2018-05-16 23:46:00

gerza
Contributor
Registered: 2018-05-05
Posts: 5

Re: Source code Proxmark3 GUI by Gaucho

Elsin10 wrote:
gerza wrote:

There is not a gaucho compiled gui for windows updated. I try old 2013 version but don't work with last iceman fork

¿are plans of compile and update windows gui for last iceman fork?

Sorry to ask this but what is this "fork" ? Totally new at this. I'm learning.

iceman fork is the best firmware and  environment  for proxmark

here you can see official firmware an iceman firmware


http://www.proxmark.org/forum/viewtopic.php?id=3975

Last edited by gerza (2018-05-16 23:47:40)

Offline

Board footer

Powered by FluxBB