Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2017-09-04 11:02:02

Dmanufacturer
Contributor
Registered: 2017-08-15
Posts: 35

[Solved]Encrypting block 7 iclass_decryptionkey.bin

Hi Everyone,

I've been trying to tackle the 'hf iclass encryptblk <data>' command and haven't had any luck.. no matter what I try, I hit a wall.

It's my understanding it requires the TDES key and not the master authentication key which can be found either from a dumped RevA firmware.

Not sure if this key then needs permutation or how to even convert that to the .bin file it requests. I've been using xxd commands.

I would appreciate if you could put me in the right direction.

EDIT: here is how you create iclass_decryptionkey.bin

echo "key_here" > key_dump
xxd -r -p key_dump > iclass_decryptionkey.bin

Last edited by Dmanufacturer (2017-09-05 06:31:36)

Offline

Board footer

Powered by FluxBB