Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2011-11-22 09:41:08

aminbakhtvar62
Contributor
Registered: 2011-02-23
Posts: 24

there is interference between reader and pm3's antennas.hw14a snoop

as i place the pm3's antenna close to reader ,the reader encounters error ,so i pulling back pm3's antenna enough to make reader work, but now the only sniffed signals are belong to tag.what should i do?
every commands in version winter2010 works pretty good. except "hw 14a snoop" and "hw 14a list" that only lists some unrecognized signals of tag.it works fine as a reader and list a complete communication.

bootrom:version information not available
os:version information not available
fpga image built on 2009/12/08
any help would be appreciated.

Last edited by aminbakhtvar62 (2011-11-22 10:15:23)

Offline

Board footer

Powered by FluxBB