Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-12-27 13:11:31

gaspin
Contributor
Registered: 2021-02-07
Posts: 4

Error writing at FUID

Hi guys I'm triying for first time set a new UID into a chip FUID.
always I've made csetuid ffffffffff 0004 08 w with normal chip. But now I get a error.

--wipe card:YES uid: XX XX XX XX
wupC1 error
couln't get old data. Will write over the last bytes of Block 0.
new block 0: XX XX XX XX XX XX XX 00 00 00 00 00 00 00 00 00
WUPc1ERROR
can't set UID. error=-1

Can someone help me? what is the fault?

Offline

Board footer

Powered by FluxBB