Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2013-07-26 06:25:16

Pitiya
Member
Registered: 2013-07-26
Posts: 4

Proxmark standalone support for Mifare

Is there any firmware for proxmark 3 which enables it to read UID's from mifare cards in standalone mode?

Offline

#2 2013-07-26 13:54:48

moebius
Contributor
Registered: 2011-03-10
Posts: 206

Re: Proxmark standalone support for Mifare

AFAIK Nope, but it's easy to implement. You can also do that with a simple arduino UNO + nfc shield (+ lcd shield) wink

be good.

Offline

#3 2013-07-27 04:38:24

Pitiya
Member
Registered: 2013-07-26
Posts: 4

Re: Proxmark standalone support for Mifare

Can U please show me a small example of how to do that. I'm novice in programming field sad Sorry...

Offline

#4 2013-07-27 21:44:00

moebius
Contributor
Registered: 2011-03-10
Posts: 206

Re: Proxmark standalone support for Mifare

If you want an example using Arduino, this is not the forum to talk about, but you can mail me and I'll send you how to do that.

If you're talking about coding inside Proxmark3, just take a look at two pieces of code: The one that does the Collect UID's and then look for "stand-alone" and you'll find out how to mix both stuff together.

Have fun!

Offline

#5 2013-07-28 04:04:44

Pitiya
Member
Registered: 2013-07-26
Posts: 4

Re: Proxmark standalone support for Mifare

Thanks Moebius you are very helpful smile Can I have your email address please?

Offline

#6 2013-07-28 22:21:39

moebius
Contributor
Registered: 2011-03-10
Posts: 206

Re: Proxmark standalone support for Mifare

Just sent you an email to the one you've declared during your registration at the forum.

Offline

Board footer

Powered by FluxBB