Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-01-15 05:43:16

skygear
Contributor
Registered: 2019-08-11
Posts: 14

Dead Project? Is Proxmark3 rdv4 project dead?

Dead Project? Is Proxmark3 rdv4 project dead?  Is there another version in the works? What is everyone currently using? Was looking to get another one. But if an RDV5 / USB C version is in the works. then I'll be patient

Offline

#2 2021-01-16 15:25:30

iceman
Administrator
Registered: 2013-04-25
Posts: 9,523
Website

Re: Dead Project? Is Proxmark3 rdv4 project dead?

The RDV4 is still on market and being sold.
All cheap Pm3 RDV3 easy based clones are flowing over on aliexpress.

The only thing you need to keep an eye on when buying is that it is the 512kb version.

To my knowledge, there is no RDV5 / USB-C  version in the making from any of the official manufacturers  (ryscorp, proxgrind, elechouse)

Online

#3 2021-08-28 01:37:28

skygear
Contributor
Registered: 2019-08-11
Posts: 14

Re: Dead Project? Is Proxmark3 rdv4 project dead?

Thanks Iceman. I have the RDV4.01 and just ordered the bluetooth/ bat board for it. Also grabbed the Chameleon Tiny Pro for testing.

I'm still in if there ever is a redesign with the USB-C ?

Offline

#4 2021-08-30 17:07:53

iceman
Administrator
Registered: 2013-04-25
Posts: 9,523
Website

Re: Dead Project? Is Proxmark3 rdv4 project dead?

Doubtful

Online

Board footer

Powered by FluxBB