Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-09-05 21:59:31

Rosco
Contributor
Registered: 2019-12-10
Posts: 43

Command to turn the field on and off fast

I have an unusual use case for the Proxmark: I use it as a switchable 13.56 MHz field generator, to output morse code on an implant with LEDs activated by the NFC antenna. No selecting a chip, no talking to it, no nothing. Just field on and off. You can see what this is about here: https://forum.dangerousthings.com/t/flashing-morse-code-on-a-led-implant/8041

The problem is, I looked around in the Proxmark client's list of commands, but I couldn't find commands really dedicated to controlling the field. The best I could find was those:

Field on: hf 14a raw -a -p
Field off: hf 14a reader x s

They work, but they're quite slow. As a result, I have to limit the speed at which I can output a morse code message.

Any way of controlling the field more quickly?

Last edited by Rosco (2020-09-05 22:53:41)

Offline

Board footer

Powered by FluxBB