Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-08-25 19:31:31

Codeplayer
Contributor
Registered: 2020-08-25
Posts: 2

0/ Hi Everyone!

Hello!

I am a relatively new user from Estonia (+-6 months exp).

I have expreimented around and cloned some of my lf tags. I have yet to learn hf, Mifare, have some trouble cloning.

However, since I like using Andprox much with OTG I flash often, since it can only take old official firmware.

Therefore I have made some adjustmets to the batch scripts of Flash all and Go, that come with precompiled nightlies, I would like to share that to give back to the community.

The main difference is listing COM devices for easier reference and when correct com number is chosen, it shows COM properties, baud, etc. Also flashing script checks and reports firmware files present.

Thank you all contributors for your time and passion into this for us users to enjoy!

Offline

#2 2020-08-25 19:41:19

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: 0/ Hi Everyone!

Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.

Your access rights has been updated.

Offline

Board footer

Powered by FluxBB