Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-07-23 02:53:36

emersonxr3
Contributor
Registered: 2020-03-20
Posts: 26

how do i use the command?

guys sorry to bother i have a mifare plus and i would like to study it first i would like to know how i write

[usb] pm3 --> hf mfp wrbl
Usage: hf mfp wrbl [-h|-H|--help] [-v|-V|--verbose] [-b|-B|--keyb] <Block Num (0..255)> <Data (HEX 16 bytes)> [<Key (HEX 16 bytes)>]
Writes one block to Mifare Plus card.

    -h, -H, --help       This help
    -v, -V, --verbose    show internal data.
    -b, -B, --keyb       use key B (by default keyA).

Usage:
        hf mfp wrbl 1 ff0000000000000000000000000000ff 000102030405060708090a0b0c0d0e0f -> writes block 1 data
        hf mfp wrbl 2 ff0000000000000000000000000000ff -v -> writes block 2 data with default key 0xFF..0xFF and some additional data

Offline

Board footer

Powered by FluxBB