Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-12-25 14:42:12

udihakim
Contributor
Registered: 2019-12-25
Posts: 2

Bricked RDV4 - Wrong bootloader address?

Hi All,
It seems like i've bricked one of my Proxmarks RDV4.
My HW has only one Xilinx chip, it's missing the AT91.
I connected the JTAG header to a JLINK and everyting works smoothly, after I finished programming the bootloader to 0x00100000 I am getting an error on my USB device "Unknown USB Device (Device Descriptor Request Failed)".

I would like to know if the bootloader stayed at the address (0x00100000) after the HW moved to the single chip design?
To me it seems like I am writing the bootloader to the wrong address...

Last edited by udihakim (2019-12-25 14:45:18)

Offline

#2 2019-12-25 16:10:21

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Bricked RDV4 - Wrong bootloader address?

Did you follow the jtag instructions?
https://github.com/RfidResearchGroup/pr … g_notes.md

Since you have jtag possibilities you can revive your device.

Offline

Board footer

Powered by FluxBB