Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-12-12 06:18:01

yukihama
Contributor
Registered: 2018-05-13
Posts: 100

unknown command:: 0x61334d50[!!] ERROR: cannot communica

HI,
try iceman folk on kali linux with this unknown error:

iceman@icesql.net          
  ██║     ██║ ╚═╝ ██║ ████╔╝    https://github.com/rfidresearchgroup/proxmark3/          
  ╚═╝     ╚═╝     ╚═╝ ╚═══╝  pre-release v4.0          
          
[=] Session log /root/.proxmark3/log_20191212.txt
[=] Using UART port /dev/ttyACM0           
unknown command:: 0x61334d50[!!] ERROR: cannot communicate with the Proxmark

anyone know why?
ICEMAN folk with RDV2 connected by usb^_^

Offline

#2 2019-12-12 08:20:29

iceman
Administrator
Registered: 2013-04-25
Posts: 6,092
Website

Re: unknown command:: 0x61334d50[!!] ERROR: cannot communica

... how about make sure to flash the device with the same firmware image that came with your proxmark3 client software?
i.e.  don't mix between client / fw from different sources.


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

Board footer

Powered by FluxBB