Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
#1 2019-11-04 02:06:24
- ebodyyy
- Contributor
- Registered: 2019-10-02
- Posts: 14
How To Copy NXP MIFARE CLASSIC 1k
Hello Everyone,
I'm fairly new to RFID and just started successfully copying 125khz fobs. I encountered some high frequency fobs and wasn't sure exactly how to copy them?
I started reading that datasheet for the Mifare Fob https://www.nxp.com/docs/en/data-sheet/MF1S50YYX_V1.pdf and looked through several posts on here but where do i begin? what would be the steps to clone this fob? If someone could provide this information or even refer me to a topic where this has been discussed previously, I would appreciate that.
This is the output from my screen btw.
proxmark3> hf search
UID : 82 62 5f 03
ATQA : 00 04
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1
proprietary non iso14443-4 card found, RATS not supported
Answers to chinese magic backdoor commands: NO
Valid ISO14443A Tag Found - Quiting SearchOffline
#2 2019-11-04 17:59:23
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: How To Copy NXP MIFARE CLASSIC 1k
...read the offical wiki page. or use your google foo on "mifare clone".
Offline
Pages: 1