Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-10-09 02:33:41

saizad
Contributor
Registered: 2019-10-09
Posts: 2

Cloning Indala to em410x

Hi, I am trying to clone my apartment fob that is Indala to em410x (Ceramic Ring 125Khz or 13.56 MHZ). I ran lf indala clone a000000091f882f1 em410x but when I tried it didn't work. Just want to know whether can I clone Indala fob to this ring? When I run lf search for em410x i get this output:

proxmark3> lf search
NOTE: some demods output possible binary
  if it finds something that looks like a tag
False Positives ARE possible

Checking for known tags:

EM410x pattern found:

EM TAG ID      : 2800E9D96C

Possible de-scramble patterns
Unique TAG ID  : 1400979B36
HoneyWell IdentKey {
DEZ 8          : 15325548
DEZ 10         : 0015325548
DEZ 5.5        : 00233.55660
DEZ 3.5A       : 040.55660
DEZ 3.5B       : 000.55660
DEZ 3.5C       : 233.55660
DEZ 14/IK2     : 00171814017388
DEZ 15/IK3     : 000085909281590
DEZ 20/ZK      : 01040000090709110306
}
Other          : 55660_233_15325548
Pattern Paxton : 687740780 [0x28FE176C]
Pattern 1      : 11988306 [0xB6ED52]
Pattern Sebury : 55660 105 6936940  [0xD96C 0x69 0x69D96C]

Valid EM410x ID Found!

Valid EM4x05/EM4x69 Chip Found
Try lf em 4x05... commands

Offline

#2 2019-10-09 07:14:45

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Cloning Indala to em410x

Welcome and thank you for reading the introduction post http://www.proxmark.org/forum/viewtopic.php?id=1125.

Your access rights has been updated.

Offline

Board footer

Powered by FluxBB