Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-10-06 03:06:57

Lenox
Contributor
Registered: 2015-01-29
Posts: 42

Need help to flash firmware from iceman back to official

I was using official version (latest) and tried to flash the iceman version to try some features. But now I can not flash back to official version. The device manager shows the comport( no. 15) before the flashing, but comport disappears during the flashing procedure. And on the PM3 board, the yellow and red lights are on.

Any ideas?

Thanks in advance.

Offline

#2 2019-10-06 03:32:07

Lenox
Contributor
Registered: 2015-01-29
Posts: 42

Re: Need help to flash firmware from iceman back to official

I found solution:
http://www.proxmark.org/forum/viewtopic.php?id=5214

Offline

#3 2019-10-06 16:09:15

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Need help to flash firmware from iceman back to official

I suggest you edit your first post and add the prefix "[solved]" to your title

Offline

Board footer

Powered by FluxBB