Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-09-29 09:32:17

Zpiccolo
Contributor
Registered: 2019-09-28
Posts: 2

help mifare recovery

Hi everyone, sorry for my bad English.
I'm new with proxmark3 and I need your help.
Reading on the net I managed to clone a mifare card, my problem is that when I try to rewrite the same card it gives me an error, it seems to be protected. How can I try to reuse it and make it rewritable again?

My procedure is as follows:
cd proxmark3
./client/proxmark3 / dev / ttyACM0
hf search
hf mf chk *?
hf mf nested 1 0 A ffffffffffff d
hf mf dump
hf mf restore 1
hf mf csetuid ba2ea6ab

all this with linux kali

Welcome suggestions and advice

Offline

#2 2019-09-29 10:46:28

ulisse
Contributor
Registered: 2019-09-29
Posts: 8

Re: help mifare recovery

Hello you can tell me that you have to use commands with Prof Mark to be able to read the keys in a me make classi
Honestly I can not understand what commands you have to enter so that give me all the keys and all blocks do not know how to do you can help me please

Offline

Board footer

Powered by FluxBB