Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-09-11 06:14:27

Kurushimi
Contributor
Registered: 2018-04-09
Posts: 6

Can I extract the antenna signal generated by the proxmark?

So, as I understand it, a 13.56 MHz wave is generated on the HF antenna which is used to power HF RFID cards near it. Is it possible to hook up an oscilloscope to the proxmark to view this wave?

I've got a Proxmark3 Rdv 4.0. I see some things labeled "PWR", "RAW" and "GND". Is there some documentation explaining what these things are? Can I hook up the oscilloscope to those in some way to read the antenna signal?

Offline

Board footer

Powered by FluxBB