Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-03-27 11:21:19

JohnDoePM
Contributor
Registered: 2018-07-08
Posts: 49

[solved] hf 14a sniff - no reaction

Dear community,

on an Ubuntu 18 system I get exactly no response from the hf 14a sniff command. I'm running the latest iceman fork.
Could somebody please give me a hint what to do or expect?
Regards,

JD.

Edition: Was to stupid to push the button. I will post the results later.

Last edited by JohnDoePM (2019-03-27 14:27:45)

Offline

#2 2019-04-13 18:58:37

the_menda14
Contributor
Registered: 2019-04-12
Posts: 4

Re: [solved] hf 14a sniff - no reaction

Same newbie here. You have to push the button to stop the recording.
Then you can use "hf list 14a" or "hf list mf" if you are using a mifare to have the keys automatically decrypted.

See also http://www.proxmark.org/forum/viewtopic.php?pid=34769#p34769

Note: I asume that you are using mf 14a snoop (in that case please correct your post)

Offline

Board footer

Powered by FluxBB