Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2019-02-06 22:22:49

EnnioEvo
Contributor
Registered: 2019-02-06
Posts: 4

Can I sniff with just an Arduino and an NFC shield?

Hi,

I'm discovering the NFC world, and I have some doubts (even if I've read this post that was very useful):

1) If my only target is to sniff a connection, wouldn't just an Arduino with an NFC shield work? Maybe the problem would be to interpret the data, exist software for Arduino or for other NFC sensor to do so?

2) What about other cheap solutions like this board with TFR7970A? (becouse I'm just approaching this world, I don't want to spend much moneys)

3)Or simply a ACR122U connected to a PC?

4) And what about if I'm interested in sniffing becouse I'm interested in cloning a tag? (didactic pourpose, nothing of illegal). I have understood that, if other simple attempts won't work, I'll have to sniff the connection between tag and reader, is that it? How much can I improve my chances of cloning if I can sniff this connection? I'm interested in Mifare Classic EV1 tags and safer.

Good evening,
Ennio

Offline

#2 2019-02-13 14:02:05

iceman
Administrator
Registered: 2013-04-25
Posts: 5,613
Website

Re: Can I sniff with just an Arduino and an NFC shield?

Just to make sure,   you know that you are posting in a dedicated proxmark3 forum?  Where things relate to the proxmark3 device.
All other readers you will need to find support in their own forums / githubs etc.


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#3 2019-02-13 15:06:30

EnnioEvo
Contributor
Registered: 2019-02-06
Posts: 4

Re: Can I sniff with just an Arduino and an NFC shield?

Yeah, I know, but this is the most Active community on nfc!
Please!!

Offline

#4 2019-02-14 11:32:38

EnnioEvo
Contributor
Registered: 2019-02-06
Posts: 4

Re: Can I sniff with just an Arduino and an NFC shield?

Moreover, this is an opportunity to proxmark developer to explain what's the value added of Proxmark3 rather than home made solutions.

Offline

Board footer

Powered by FluxBB