Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2018-07-07 14:22:58

gmsuz
Contributor
Registered: 2017-10-24
Posts: 6

Unable to read Iclass card serial no. with a +

I got this iclass card with a + in front of the serial no. Most of the cards were with an *

The card was able to authenticate on omnikey 5321 with ContactlessDemoVC and iclassified using standard master key.
It was able to read and write on block 6 to 12 except blk 2 and 3. It failed to write the new div key on blk 3 and was unable to authenticate again with the card.

I checked on omnikey workbench it was detected as a 13.56MHz card

On my PM3 RDV2, the card cannot be read and prompted "no known/supported 13.56 MHz tags found"

[ ARM ]
bootrom: iceman/master/ice_v3.1.0-568-ge09d5385 2018-02-14 15:55:18
      os: iceman/master/ice_v3.1.0-568-ge09d5385 2018-02-14 15:55:24
[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2017/11/10 at 19:24:16

pm3 --> hf search
#db# [!] error, uneven octet! (extra bits!) mask 02
#db# [!] error, uneven octet! (extra bits!) mask 02
#db# [!] error, uneven octet! (extra bits!) mask 02
timeout while waiting for reply.

no known/supported 13.56 MHz tags found

Does anyone knows why PM3 is unable to read this type of card ?

Offline

#2 2018-07-19 03:04:59

yukihama
Contributor
Registered: 2018-05-13
Posts: 53

Re: Unable to read Iclass card serial no. with a +

gmsuz wrote:

I got this iclass card with a + in front of the serial no. Most of the cards were with an *

The card was able to authenticate on omnikey 5321 with ContactlessDemoVC and iclassified using standard master key.
It was able to read and write on block 6 to 12 except blk 2 and 3. It failed to write the new div key on blk 3 and was unable to authenticate again with the card.

I checked on omnikey workbench it was detected as a 13.56MHz card

On my PM3 RDV2, the card cannot be read and prompted "no known/supported 13.56 MHz tags found"

[ ARM ]
bootrom: iceman/master/ice_v3.1.0-568-ge09d5385 2018-02-14 15:55:18
      os: iceman/master/ice_v3.1.0-568-ge09d5385 2018-02-14 15:55:24
[ FPGA ]
LF image built for 2s30vq100 on 2017/10/25 at 19:50:50
HF image built for 2s30vq100 on 2017/11/10 at 19:24:16

pm3 --> hf search
#db# [!] error, uneven octet! (extra bits!) mask 02
#db# [!] error, uneven octet! (extra bits!) mask 02
#db# [!] error, uneven octet! (extra bits!) mask 02
timeout while waiting for reply.

no known/supported 13.56 MHz tags found

Does anyone knows why PM3 is unable to read this type of card ?


Hi gmsuz
I got this same problem of reading thin card with "+" printed. I have not got any answer yet.
I guess this is non standard iclass card issued bu HID to prevent us reading^_^

Last edited by yukihama (2018-07-19 03:06:27)

Offline

#3 2018-07-19 10:31:49

Heru
Contributor
Registered: 2017-10-08
Posts: 76

Re: Unable to read Iclass card serial no. with a +

You might have killed the card,

Offline

#4 2018-07-24 12:18:44

brantz
Contributor
Registered: 2014-03-19
Posts: 38

Re: Unable to read Iclass card serial no. with a +

only genuine HID product can read it.

Offline

#5 2018-10-19 14:20:24

Dot.Com
Contributor
From: Hong Kong
Registered: 2016-10-05
Posts: 175
Website

Re: Unable to read Iclass card serial no. with a +

Let me explain a little more about the new HID Iclass cards.

the + Cards are not readable by the current pm3 due to the new mac calculation set by HID to prevent cloning (My assumption).

They kind of discontinued the * cards.

So now what is available in China due to reports is they are left with the + cards or some even * with the new format.

I just ordered 500 cards (legacy) - thin & thick cards - All tested (what is left I guess with one supplier)

I guess this is all that remains out in the market

Last edited by Dot.Com (2018-10-19 14:28:33)


You live, you learn.
You give, you take.
You win, you lose.

Offline

#6 2018-11-11 07:23:21

brantz
Contributor
Registered: 2014-03-19
Posts: 38

Re: Unable to read Iclass card serial no. with a +

I have plenty of legacy credentials. if anyone wants, ping me

Offline

#7 2018-11-11 10:22:43

iceman
Administrator
Registered: 2013-04-25
Posts: 4,945
Website

Re: Unable to read Iclass card serial no. with a +

what kind of legacy credentials?   You can make a  "hf iclass reader" output?


冰人

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#8 Yesterday 15:53:51

yukihama
Contributor
Registered: 2018-05-13
Posts: 53

Re: Unable to read Iclass card serial no. with a +

brantz wrote:

I have plenty of legacy credentials. if anyone wants, ping me


hi  what is legacy credentials? I am interested in them please ping me !

Offline

Board footer

Powered by FluxBB