Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2018-10-13 10:46:14

mike
Contributor
Registered: 2018-10-11
Posts: 4

proxmark3 elechouse

Posts: 2
Email
Hi,when i do hf tune then I see sending bytes to proxmark failed. And when I whant to flash  the proxmark3 again then i see #db# button press detected but no stored taged to play. (ignoring button).also when I whant to read i see failed to proxmark can. Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.I read that many times but still stuck that's why I ask if somebody can help .

Online

#2 2018-10-13 12:48:44

mike
Contributor
Registered: 2018-10-11
Posts: 4

Re: proxmark3 elechouse

Hi,I fixed it already it work good.But how can I brute force hf cards?

Online

Board footer

Powered by FluxBB