Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-08-30 20:23:41

streetwitch
Contributor
Registered: 2018-08-30
Posts: 13

Badge cloned, but won't open door.

So, my Proxmark3 reads my lf badge, and even writes it to my HID ProxCard II.  Problem is the Prox Card II badge will not open the door.  Here is a log of everything I did in the console:

root@kali:/corey/proxmark3/client# ./proxmark3 /dev/ttyACM0

(process:1850): GConf-WARNING **: 15:15:44.663: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

(proxmark3:1850): GConf-WARNING **: 15:15:44.732: Client failed to connect to the D-BUS daemon:
Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Qt: Session management error: None of the authentication protocols specified are supported
Prox/RFID mark3 RFID instrument         
bootrom: master/v3.0.1-397-gd62f7ba-suspect 2018-08-30 02:24:26
os: master/v3.0.1-397-gd62f7ba-suspect 2018-08-30 02:24:27
fpga_lf.bit built for 2s30vq100 on 2015/03/06 at 07:38:04
fpga_hf.bit built for 2s30vq100 on 2018/08/13 at 21:22:51         
uC: AT91SAM7S256 Rev D         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 256K bytes. Used: 194796 bytes (74%). Free: 67348 bytes (26%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory         
proxmark3> lf search
NOTE: some demods output possible binary
  if it finds something that looks like a tag         
False Positives ARE possible
         

Checking for known tags:
         
Securakey Tag Found--BitLen: 26, Card ID: 32946, FC: 0x16, Raw: 7FCB400000B4026536800000         
Wiegand: 002D0165, Parity: Passed         

How the FC translates to printed FC is unknown         
How the checksum is calculated is unknown         
Help the community identify this format further
by sharing your tag on the pm3 forum or with forum members         

Valid Securakey ID Found!         
proxmark3> lf hid clone 002D0165
Cloning tag with ID 0002d0165         
#db# DONE!         
proxmark3> lf search
NOTE: some demods output possible binary
  if it finds something that looks like a tag         
False Positives ARE possible
         

Checking for known tags:
         
HID Prox TAG ID: 0002d0165 (32946) - Format Len: 37 bits - FC: 2 - Card: 426162         

Valid HID Prox ID Found!         
proxmark3>

Offline

#2 2018-08-30 20:42:57

streetwitch
Contributor
Registered: 2018-08-30
Posts: 13

Re: Badge cloned, but won't open door.

I just ran an 'lf search' on my RFID Tag, and then a 'lf hid clone'

It overwrote my RFID Tag with information, and now my real tag won't open the door either!

Offline

#3 2018-08-31 09:43:18

Tom5ive
Contributor
Registered: 2017-09-18
Posts: 53

Re: Badge cloned, but won't open door.

Probably not opening the door due to the door receiving the wrong card number? What ID is your door expecting?

Offline

#4 2018-08-31 13:25:19

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Badge cloned, but won't open door.

Or the fact that a securakey is not an hid key.

Offline

#5 2018-09-01 02:54:55

streetwitch
Contributor
Registered: 2018-08-30
Posts: 13

Re: Badge cloned, but won't open door.

Yes, but is there any support for securakey?

Offline

#6 2018-09-01 03:00:22

Tom5ive
Contributor
Registered: 2017-09-18
Posts: 53

Re: Badge cloned, but won't open door.

marshmellow wrote:

Or the fact that a securakey is not an hid key.

Oops I missed that! Lol

Offline

Board footer

Powered by FluxBB