Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-02-24 18:31:29

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

[RDV4] Questions / feedback regarding proxmark3 RDV40

The idea with this thread is for you guys to have a place to ask questions or give feedback on the proxmark3 rdv40.

What about the FPC connector?  You claim it can do BL? 
Well,  it can do Serial over FPC,  and the latest addon is using it.  No more cables!
https://twitter.com/i/status/1117294810124161024

How to compile RRG RDV40 repo for non-rdv4 devices?

Follow the instructions here
https://github.com/RfidResearchGroup/pr … r-non-rdv4

If you have problems,  I strongly advice you take time to search on this forum for solutions first,  then head over at GitHub and read issues both open and closed ones. 

If its a RDV40 hardware problem,  post a new thread with this following information and a accurate description of where the hardware fails you.

Which OS?
hw version
hw status
hw tune

Possible known faults
- Kali and Archlinux distros can't get a ttyACM,   usually needs to kill their modem manager in order for the pm3 to enumerate properly.
- Mixed firmware / client versions.    Download & compile one repo and flash it.   Use the shell scripts if RDV40 repo.

Read the README.md or Wiki.

Use helptexts
If its about not knowing how to operate the pm3 client,  try reading the help-texts.
Usually found with adding a "h" to the command like this: hf 14a read h

Trace files and tracelog data
For LF, save a trace (data save) and upload for sharing. That helps out when trying to identify it.
For HF, save tracelog via (rdv4) trace save and upload for sharing.

Finally
Questions like "I can't hack xcy card",  its just you, who don't know what you are doing.  Go back and search the forum one more time.  Repeat until you find your answer.  Pretty many cards has topics here,  if you can't find any,  post in  "unknown tags" category with a picture and eventual text found.  Use your pm3 to gather as much information.

Offline

#2 2018-02-26 07:08:01

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

O lord,   the kickstarer is 87%  in 48hours.    We feel the community love!

Offline

#3 2018-02-27 04:07:18

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 632

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Steadily climbing! Cruising past 111% as I'm posting this.

Thank you everyone for all that you've done to help make this possible!

Offline

#4 2018-02-27 09:17:45

Dmanufacturer
Contributor
Registered: 2017-08-15
Posts: 42

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Congratulations guys! you have an awesome product and I can't wait to get my hands on it.

Offline

#5 2018-02-27 09:57:26

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Is there some information available (besides the pictures and FAQ on kickstarter)?

Offline

#6 2018-02-27 10:10:41

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Besides the kickstarter description, faq and pictures.  no.
What kind of information are you looking for?

Offline

#7 2018-02-27 10:29:59

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Is it backwards compatible with existing PM3? Existing firmware runs on Rdv40? Same SOC, same FPGA? Schematic available?

Offline

#8 2018-02-27 10:40:23

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Backwards compatible with existing PM3? 
The official firmware runs on it, same fpga, same mcu,   since the MCU has limited pins, previous unused pins in the firmware, has been taken to support the FPC connector and flashmem.   Schematic not released.

Offline

#9 2018-04-15 20:05:17

skappy
Contributor
Registered: 2014-01-13
Posts: 91

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Dear Iceman,
I have just missed the kickstarter campain, is there any possibility to participate nevertheless please ?
Thx a lot !
Have a nice day
Skappy

Offline

#10 2018-04-16 06:16:33

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Aouch,  the kickstarter is closed as you noticed.  However we are working with getting US/EU partners as we speak in order to get the rdv4 out on some webshops.  You will be able to buy it there most likely end of the summer or beginning autumn.

Offline

#11 2018-05-03 19:34:36

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

To ya'll rdv40 kickstarter backers,

A sneak preview for the onboard flash memory support on client.
https://www.youtube.com/watch?v=NXxRdzDpjH8

Offline

#12 2018-06-21 15:15:09

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

We all back from fulfilling the VIP-pledge in ShenZhen, China,   it was a great time meeting up with Garrett from Hackerware house!

Offline

#13 2018-07-09 16:01:14

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

To ya'll rdv40 kickstart backers,

A short preview on how the new smart card commands works on pm3 client.

https://youtu.be/bYU7j3mwwDk

Offline

#14 2018-07-20 09:57:58

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

The team had some discussions and we concluded since RDV40 runs offical pm3 repo but it will of course not run the new hardware features.  There differenes are some changes like hw tune which will indicate the wrong values for antennas etc but to support the new features we would change code.  We agreed not to convolute offical repo with our changes given the vaste number of older devices.
It would make source code more complicated as it is and all we want is harmony in the community.
All new features is found in iceman fork. The team will only work on RDV40 source code base from now on which lead us to create a new repo dedicated for RDV40.  You find the links below,  you can follow us but I haven't updated the repo yet.

Share your love and dedication to proxmark3 and especially RDV40 by contributing to it.


Offline

#15 2018-07-21 00:09:20

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

....@doegox made a nice visual demostration of distances for RDV40 and the large antenna.

https://pbs.twimg.com/media/DikysxeX4AE9U5G.jpg

Offline

#16 2018-07-25 12:37:15

fips
Contributor
Registered: 2018-02-17
Posts: 12

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Are you already writing a manual? like what the LEDs about? and some simple FAQs?

Offline

#17 2018-07-27 08:58:50

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

The proxmark wiki is an excellent starting point.  I also suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125

The firmware uses leds very different within different commands.  So no generic overview exists.  There has been blogposts for some standalone modes that describes the led use within that standalone mode.   Feel free to contribute.

Offline

#18 2018-07-27 15:34:48

www
Contributor
Registered: 2018-07-25
Posts: 9

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Hi all.
I'm having trouble guessing the use of the red & blue antennas.
Event the kickstarter page is quite mutic on this.
" LF & HF antennas "
But they seem to ben exactly identical to the black one and holding both frequencies antennas.
Please explain?

Offline

#19 2018-07-27 16:21:58

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

We answered this one on the kickstarter comment section a couple of months back,  https://www.kickstarter.com/projects/14 … 0/comments

The blue and red antennas are the same as the black one. All of them comes in LF & HF. Same functionality just different color.

Offline

#20 2018-07-29 07:19:08

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

About binary distributions for RDV40
The short answer is no. We are not planning on maintaining binary files.
The reason for this is that there is many different OS's and configurations.
Secondly the source code changes alot and the general recommendation of this forum is to run the latest source.
Thirdly the RDV40 runs both offical repo and iceman fork.
Forthly, there already exists a binary distribution by Gator96100  http://www.proxmark.org/forum/viewtopic.php?id=3975

Where to find information?
You will find that there is much information on this forum and on the proxmark3 wiki.  Do take time to read it.  Most common problems has already been asked and answered several times. The search button is your friend.

First thing to do with your brand new RDV40?
Your RDV40  comes with a modern icemanfork image which enables you to flash it with either latest offical repo or iceman fork normally.
Git clone / compile / flash and enjoy it.   Or if you don't want to compile,  go for the pre-compiled binary distro by Gator96100

Observations

* Continuously usage will cause overheating, so try not to use it under crazy conditions (Under the sun or extreme condition)
* Official Repo will cause overheating, since it is quite lax in turning off the antenna.

Just try not to push the proxmark3 too hard under extreme condition. It happens on all revisions of the proxmark3 device.

Offline

#21 2018-07-30 05:39:49

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Where does this heat come from? The more antenna power, the more heat.

RDV40 standard dual antenna pushes 71V LF and 43V HF
That is some serious power levels.

How much more can you cream out? Good question, the adc and design maxes about 130V LF and 46V  HF if I remember it correct...


pm3 --> hw tune

[=] measuring antenna characteristics, please wait...

....

[+] LF antenna: 71.95 V - 125.00 kHz
[+] LF antenna: 37.67 V - 134.00 kHz
[+] LF optimal: 71.95 V - 125.00 kHz
[+] LF antenna is OK

[+] HF antenna: 43.90 V - 13.56 MHz
[+] HF antenna is OK

[+] Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.

Offline

#22 2018-07-30 06:45:48

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

This would explain possible overheating on rdv40 only. What about the other revisions? The observation states "It happens on all revisions of the proxmark3 device."

Offline

#23 2018-07-30 07:15:02

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

I have no explanation as to why overheating happens on all revisions.  My guess would be hardware design,  hardware components used and software usage.  The observation is made by proxgrind, who is way better at hardware than me.

Simple software test would be,  like I mentioned a couple of months back on GitHub to take and run iso15 commands,  or any command doesn't turn of antenna afterwards,  and let the device be for 24+ hours...
https://github.com/Proxmark/proxmark3/issues/499

Offline

#24 2018-07-31 07:07:07

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

I ran the proposed test with running hf 15 reader and then simply wait and see. I "risked" both my Proxmarks at once: one PM3 with original board design and one PM3 with Elechouse RDV2. Both running current official firmware.

Results:

  • after a few minutes FPGA and the coil drivers (IC9 and IC10) become the warmest parts of the PM3

  • Maximum measured IC9 temperature during 23hours: 34 degrees Celsius (93 degress Fahrenheit) at the maximum ambient air temperature of 28 degrees Celsius (82 degrees Fahrenheit)

  • The IC temperature follows the ambient air temperature with a constant difference

Conclusion: There is no overheating risk at all with Orignal and Elechouse RDV2 boards (well, as long as you don't operate them in an oven). The statement above therefore must have been a misunderstanding?

Offline

#25 2018-07-31 10:08:41

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Please don't hijack theads. You already started one thread for this subject.

Offline

#26 2018-08-22 17:07:06

bogito
Contributor
Registered: 2017-10-18
Posts: 52

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Hey there!
Two questions:
1. What is the current battery option for RDV4 to make it portable?
2. When will the large HF antenna be available for separate purchase? smile

Offline

#27 2018-08-22 17:16:27

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Hi Bogito!

1. Currently none,  but the team is making a Bluetooth/battery addon as we speak.
2. You will need to ask the distributing webshops what they will offer.  We have no saying in it.

Offline

#28 2018-08-22 21:20:22

jump
Contributor
Registered: 2015-04-29
Posts: 57

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

After playing a bit with the rdv40 from the kickstarter campaign, including bringing it back to life through JTAG, here is my feedback/suggestions for a next iterations:

  • Really great and compact proxmark

  • I like the ABS case that is provided

  • Love the antennas

  • I would have loved to have the JTAG connector/cable provided. Even if normally you never need it, things can go wrong and with such fine pitch, not everyone will be able to recover the pm3

  • I would have preferred to see a USB-C connector because it's more sturdy (I have so many cases where the micro-USB port started to move because of mechanical stress over time) and in addition to that you can drive more power from the port which could have helped for the antennas too

  • I would have appreciated if the plastic case would have provided better access to the smartcard connector and the JTAG pins through cutouts instead of having to open the case every time you need it. I'm considering using my Dremel now to do the cutouts myself, especially now that I soldered a connector on the JTAG pins to get easier access which prevents me from closing the case.

  • Documentation about what can be done through the FPC?

  • Even though iceman explained the rationale, I would have preferred to see the rdv40 mods (smartcard, FPC, external flash) merged into the main repository. The fork brings more risk about seeing the 2 repositories going out of sync at some point.

Offline

#29 2018-08-22 23:01:24

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

smartcard is included in main repo now.  (just have to turn it on in the makefile options as by default it is disabled (like LCD))

the rest requires someone to port the code, test, and make it useful.  (while allowing it to be defaulted to not be included in the default compile but instead be switched on at will)

i do agree that for the smartcard add-on the case should have had a small slot for the ribbon cable to come out (i just pinched it - we'll see how long before it breaks).

Offline

#30 2018-08-31 19:58:47

larrycook99
Contributor
Registered: 2018-05-29
Posts: 2

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

I just got a Proxmark rdv 4.0 and am having some issues with it that I want to know where the best place to discuss them is. Is this the preferred place or is there one I have yet to find?

Specifically I am playing with it using some a 1K card that I have and it seems to be unreliable reading it as compared to the RDV 2.0 card that I have been using. I am using the RDV 4.0 as it came out of the box and the RDV 2.0 is using code from the iceman repo.

The couple of things that I have tried is to use hf search to identify the card. The 2.0 works all of the time and the 4.0 identifies the card less than 50% of the time.

Then I try reading sector 0 with the known A key, "a0a1a2a3a4a5", and the 2.0 reads it every time and the 4.0 again less than half the time.

Frankly, this is not what I expected, so I am looking for where best to seek out answers concerning this disparity and I haven't yet found an active discussion of rdv 4.0 issues, function or much of anything else.

Offline

#31 2018-08-31 21:14:07

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

..not a support thread,  but if you start a thread  do add  the following information to it.  This goes for all other who might read this post.

Which OS?
hw version
hw status
hw tune

I will repeat what has been said many times before on this forum,

When it comes to repos,  don't mix firmware/client.
See first post in this thread for RDV40 repo,   HF is quite stable on it.  Otherwise try the official pm3 repo.

When it comes to mifare/14a,  take notice about distance/positioning with tag and antenna.  Find the sweet spot.

Offline

#32 2018-08-31 22:15:40

jump
Contributor
Registered: 2015-04-29
Posts: 57

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Thanks marshmellow for porting it to the main repo!

marshmellow wrote:

i do agree that for the smartcard add-on the case should have had a small slot for the ribbon cable to come out (i just pinched it - we'll see how long before it breaks).

Actually better than a slot, I would have preferred a connector so that you can easily add or remove it when you don't need it without opening the case every time.
But, as I think I forgot to mention it in my original message, considering that the case was not originally part of the Kickstarter, I do appreciate we have one smile It was a neat addition so hats off.

Offline

#33 2018-09-01 02:56:14

Tom5ive
Contributor
Registered: 2017-09-18
Posts: 53

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

larrycook99 wrote:

I just got a Proxmark rdv 4.0 and am having some issues with it that I want to know where the best place to discuss them is. Is this the preferred place or is there one I have yet to find?

Specifically I am playing with it using some a 1K card that I have and it seems to be unreliable reading it as compared to the RDV 2.0 card that I have been using. I am using the RDV 4.0 as it came out of the box and the RDV 2.0 is using code from the iceman repo.

The couple of things that I have tried is to use hf search to identify the card. The 2.0 works all of the time and the 4.0 identifies the card less than 50% of the time.

Then I try reading sector 0 with the known A key, "a0a1a2a3a4a5", and the 2.0 reads it every time and the 4.0 again less than half the time.

Frankly, this is not what I expected, so I am looking for where best to seek out answers concerning this disparity and I haven't yet found an active discussion of rdv 4.0 issues, function or much of anything else.


Potentially you have the card too close to the reader. try putting a spacer of about 1 - 1.5cm between the top of plastic casing and the card.

Offline

#34 2018-09-01 06:38:54

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Regarding the case,
The major issue with case is not one of design but one of costs.   It costs $10.000 to make a new mold.  To keep costs low we reused the mold for Chameleon Mini RevE rebooted.    I agree it would have been much more nicer with a slot for sim module extender and one for the fpc connector.  We did opted for the flat cables just because of the limit with the case.  It is still easy to cut out a slot in the case if you want to,  or just squeeze it together.  You also have an option not to use the case if you like the old style naked pcb way.

Offline

#35 2018-09-17 22:17:38

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

Old proxmark3 devices,  like  RDV20,  RDV30 easy and running the RRG Repo.

In order for  PM3 RDV20,  PM3 RDV30 etc to be flashed with RRG Repo ,  you need to read and follow the instructions found here
https://github.com/RfidResearchGroup/pr … r-non-rdv4

Offline

#36 2019-04-14 08:30:29

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: [RDV4] Questions / feedback regarding proxmark3 RDV40

No more cables!

The fixes for Serial over FPC and latest battery / BL addon is more or less done.
Watch a video here, https://twitter.com/i/status/1117294810124161024

The future is mobile.  I have been looking forward to this day since back in 2013 when I started to platy with proxmark3.

Offline

Board footer

Powered by FluxBB