Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-08-13 07:39:23

Slack
Contributor
Registered: 2018-08-13
Posts: 5

New member, old lurker

Howdy everyone, I have been around for several years using Proxmark3 and this forum.  I was going to post a question about an issue I have and realized I didn't have a forum login. So here I am as a new member and making my required introduction.

I have a Proxmark3 Rdv2, Proxmark3 Easy, a Proxmark Rdv4, a tons of cards and fobs and some cheap Chinese cloners.  I primarily deal with LF HID and EM4100 cards but would like to know more about analyzing unknown LF cards, and about HF cards in general.

Thanks to all the regular forum members who provide the great content.

Slack

Offline

#2 2018-08-13 08:23:30

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: New member, old lurker

Welcome and I usually suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction but I guess you can skip it.

Offline

Board footer

Powered by FluxBB