Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-02-14 18:16:56

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

(Solved)Need help to revive my pm3

Hi,I need to unbrick my pm3,after updating my pm3 with official Iceman's precompiled build,there are 4 lights on my pm3 whenever connect to usb port whether press and hold button or not,os could not detect on device manager,I could not flash pm3 any more,any help will be appreciated..

I was updating from pm3 v3.0.1 to latest Iceman's precompiled offical 2018/feb.13 build,firstly I held the button to flash bootrom and it failed and after that when I connect to computer,4 sets of light on like green,orange,red and blue constantly,also os could not detect pm3 at all,I don't see com port at all on my device manager,is that mean my pm3 got brick for good,do I need a j link to revive my pm3,I got my pm3 from easy elechouse,please help me with this issue I am having...

Last edited by seanedu (2018-04-16 16:34:14)

Offline

#2 2018-02-14 18:56:40

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: (Solved)Need help to revive my pm3

Don't double post.

Offline

#3 2018-02-14 19:12:49

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

I won't do it,sorry...I just needed prompt help,no one seem to reply on my issue though,
@marshmellow,I've been searching on all the forum to find similar issue of mine,but no success,do you mind helping me out if you can...

Last edited by seanedu (2018-02-14 19:14:29)

Offline

#4 2018-02-14 20:06:44

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: (Solved)Need help to revive my pm3

if you have the pm3 unplugged and you hold the button in and plug it into a new windows computer (fresh computer) while holding the button and the computer doesn't detect anything on the USB then you likely will have to jtag the device to recover it.

Offline

#5 2018-02-14 20:11:17

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: (Solved)Need help to revive my pm3

btw, I don't offer help when a user is using iceman's build.  imo only advanced users that can fix their own issues should be using that fork.  if you want support, stick with the official repo.

Offline

#6 2018-02-14 20:28:10

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

Thanks for your reply,I will try with other computer later today,but I want to know why precompiled iceman's build causing pm3 go brick though,I've been using Iceman's official build to update a firmware no problem until now,don't you think someone should warn people not to use both Iceman's and official precompiled build to prevent bricking pm3 until finding out what's causing pm3 bricking...

Offline

#7 2018-02-14 20:41:22

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

Hi,thanks again,I did not aware of that,I thought you and Iceman are working partner or should said that you are an administrator as Iceman,to be honest with you,I've using only precompiled official build till now,recently I upgraded firmware from precompiled official build to Iceman's build,that is what I made a mistake,but I hope you help me out though as you did last time when I was in trouble...

Offline

#8 2018-02-14 20:41:35

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: (Solved)Need help to revive my pm3

There are some topics regarding the iceman fork bricking events already.

Iceman's fork itself warns you that it is bleeding edge work and that he often breaks stuff. (He usually fixes it, but if you flashed when it was broken be ready to jtag...)

Offline

#9 2018-02-14 20:48:45

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

Yes,I've been searching all over Iceman's fork,but no luck,in my case is unique I think that my pm3 got 4 lights on solid when I connect to computer,but other on forum,they got like 2 light on 2 others blinking not like mine...I could not find same issue of mine on forum though..

Offline

#10 2018-02-14 20:52:14

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: (Solved)Need help to revive my pm3

Iceman is an admin here, I am a moderator here.  And yes we have often collaborated on pieces of pm3 code.  Iceman is nice enough to share publicly his pm3 playground code.  But that is what it is, his personal code modifications with no stability promises afaik.  Iceman can chime in as he sees fit.

I am unaware of any bricking events related to the official pm3 repo in the past 6 years at least.

Offline

#11 2018-02-14 20:55:42

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

Fortunately,I've got another working pm3 to play,but I like to fix the other one if you confirm that mine got brick for sure I might buy jtag or jlink even though it is gonna be long process to order one and all that to go through...

Offline

#12 2018-02-14 20:57:54

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: (Solved)Need help to revive my pm3

as i said above, if nothing is detected on a fresh computer (one it hasn't been installed on before) when it is plugged in with the button pressed (and nothing when the button is not pressed) then your bootrom is hosed...  and a jtag probably could recover it.

Offline

#13 2018-02-14 21:00:35

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

I hope that Iceman can advice me what to do when he aware of my issue,hopefully he reply soon to me to direct me....

Offline

#14 2018-02-14 21:26:56

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: (Solved)Need help to revive my pm3

...when it comes to precompiled binaries,  there is little I can do.  I don't distribute them nor do I compile them.
...I'm not aware of any bricking since the october bricking incident,   and those pre-compiled binaries should have been erased to avoid further misshaps.
...however,   as mentioned in all other sources like wiki and threads,  there is more need of information in order to conclude what has gone wrong.   Usually,  the com-port changes when going from Offical pm3 -> iceman fork or the other way,  makes many users think their pm3 is bricked since they tend to use the flash.bat files etc. 

...ask the maintainer who you downloaded the precompiled binary from and ask if s/he gotten more ppl with problems. 
...use a jlink,  buspirate and flash the recover bin and your pm3 is back to normal.

Offline

#15 2018-02-14 21:48:49

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

Hi,thanks for your reply on my issue,briefly I like to explain what happen,I had pm3 v 3.0.1 from Iceman fork and I was hoping to get latest pm3 version 3.1.0,so I downloaded latest Iceman's precompiled build from gator96100's thread latest date said 2018/02/13,while I was flashing bootrom,it got failed,and after that my pm3 gets 4 sets of solid lights when connect to computer,also os could not detect pm3 at all,that is basically what happen,do you think my pm3 got bricked or there is other possibility left beyond,if it is bricked,where do i buy jtag,bus pirate,and jlink,which one do you recommend,if it cost me a lot,isn't it better to buy new pm3 rather,please advise me...
i

Offline

#16 2018-02-14 21:50:50

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: (Solved)Need help to revive my pm3

when you fail bootrom flashing, that can happen,  nothing to do with the precompiled binary,  but yeah,  you need to JTAG it.
You can look at the webshops recommended by the forum,   and the rest is up to you.

Offline

#17 2018-02-14 22:24:54

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

Thanks again,wish me luck...

Offline

#18 2018-04-16 16:38:39

seanedu
Contributor
From: Canada
Registered: 2017-04-12
Posts: 105

Re: (Solved)Need help to revive my pm3

I finally unbricked my pm3 using with jlink clone,thanks for all the support from experts that I reviewed their work on the forum...

Offline

Board footer

Powered by FluxBB