Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-02-10 21:45:08

maxben14
Contributor
Registered: 2017-06-17
Posts: 13

What speeds 1k tag can transmit data to PCD ?

I have in my the city turnstiles transport systems, which read the cards of the mifare classic 1k type nfc-a, how do I determine at what speed from the datasheet they expect the data from the map?
I think Manchester coding use but according datasheet this cards can transmit data on NRZ-L. How me know on Manchester or NRZ-L use PCD in my transport systems ?

Offline

#2 2018-02-11 11:56:59

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: What speeds 1k tag can transmit data to PCD ?

You need to sort several things out and rephrase your questions because:

  • There is no Mifare Classic NFC type

  • There is only one speed in the Mifare Classic Datasheet

  • Mifare Classic uses Modified Miller coding from PCD to PICC and Manchester coding from PICC to PCD.

Offline

#3 2018-02-13 18:24:45

maxben14
Contributor
Registered: 2017-06-17
Posts: 13

Re: What speeds 1k tag can transmit data to PCD ?

@piwi, i try my device-emulator 1k in transport system. My device do AUTH operation about 500 mks, but turnstile send me HALT. Why ? I read datasheet about mifare classic and in datasheet 1 ms is max AUTH operation.

Offline

#4 2018-02-14 07:58:34

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: What speeds 1k tag can transmit data to PCD ?

There might be an error in your device-emulator, or you may have the wrong key.

May I remind you that this is a Proxmark forum,  not a "my device-emulator" forum. How can you expect help for something which only you have and know?

Offline

#5 2018-02-14 18:21:16

maxben14
Contributor
Registered: 2017-06-17
Posts: 13

Re: What speeds 1k tag can transmit data to PCD ?

piwi wrote:

There might be an error in your device-emulator?

What is error ? My device correctly read and write your proxmark3.
Key is correct, i checked the log that I'm sending At the right turnstile.
But i have problem and with proxmark3 on turnstile too after correct AUTH proxmark get HALT.

Offline

#6 2018-02-14 18:24:11

maxben14
Contributor
Registered: 2017-06-17
Posts: 13

Re: What speeds 1k tag can transmit data to PCD ?

My basic question what about timing on transport system do on comand AUTH ? How fast need answer on reader request with nr,ar. I answer about 500mks after get nr,ar.

Offline

Board footer

Powered by FluxBB