Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-12-18 14:44:01

sdr_herrmanns
Contributor
Registered: 2017-11-11
Posts: 28

cant write magic desfire with csetuid 8 hex symbols limit

hello,
is there any firmware which is able to write the 7 byte with csetuid for "magic" desfire cards?
(or have i overseen something in current firmware which is able to write on 7 bytes uids?)


cheers

Offline

#2 2017-12-19 12:53:05

Dot.Com
Contributor
From: Hong Kong
Registered: 2016-10-05
Posts: 180
Website

Re: cant write magic desfire with csetuid 8 hex symbols limit

If you bought it from me, I will be more than happy to pass you the magic command to change it.

Send me your order number or email to my email at info@rfxsecure.com.

Thanks.

Offline

#3 2018-01-04 11:08:44

sdr_herrmanns
Contributor
Registered: 2017-11-11
Posts: 28

Re: cant write magic desfire with csetuid 8 hex symbols limit

got it thanks!

Offline

#4 2018-02-27 13:30:41

Heru
Contributor
Registered: 2017-10-08
Posts: 78

Re: cant write magic desfire with csetuid 8 hex symbols limit

hey sdr_herrmanns

How did you access the content of your  original card? care to elaborate a bit more

Offline

Board footer

Powered by FluxBB