Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-11-09 16:15:34

Rekt77
Contributor
Registered: 2017-10-26
Posts: 8

How to increase binary counters in srt512/sri512 using WRITE_BLK()?

I'm really curious about how to increase binary counters in srt512.
I bought some of srt512 cards but i can't increase any of them.

Datasheet said it is protecting by anti-tearing protection, and developer can define the value but i can't.
(but Decrement is worked right.)

someone please tell me why i can't ..

Last edited by Rekt77 (2017-11-09 17:50:05)

Offline

#2 2017-11-09 18:03:15

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: How to increase binary counters in srt512/sri512 using WRITE_BLK()?

anti-tearing is a protection to ensure an operation happen or not.  Like atomic in databases. 
It protects you from start writing a block and then move the card away from the reader and making the card powerless,  leaving a "half" written block. Nothing to do with other restrictions like access.

Offline

#3 2017-11-09 23:10:37

Rekt77
Contributor
Registered: 2017-10-26
Posts: 8

Re: How to increase binary counters in srt512/sri512 using WRITE_BLK()?

Thanks to reply iceman.

You mean i cant reload it to some value anymore?

Offline

#4 2017-11-09 23:39:37

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: How to increase binary counters in srt512/sri512 using WRITE_BLK()?

you would need to read the datasheet and see if the block you want to write to has read/write protection,  locked, or other accessprotection.  smile

Offline

Board footer

Powered by FluxBB