Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2010-02-26 19:04:38

atrox
Contributor
Registered: 2010-01-08
Posts: 35

arm-eabi

after the switch to arm-eabi please update the tools/install-gnuarm4.sh script and the wiki-page about compiling.

thx,

Offline

#2 2010-02-26 19:15:55

iZsh
Contributor
Registered: 2010-01-02
Posts: 95

Re: arm-eabi

There are a lot more to update than just that. It will eventually be done of course.

Offline

#3 2010-02-26 19:26:01

atrox
Contributor
Registered: 2010-01-08
Posts: 35

Re: arm-eabi

can you briefly outline what i need to update from the old compiling environment to which version of arm-eabi ?
thx

Offline

#4 2010-02-26 19:35:58

iZsh
Contributor
Registered: 2010-01-02
Posts: 95

Re: arm-eabi

which OS?

Offline

#5 2010-02-27 12:39:29

atrox
Contributor
Registered: 2010-01-08
Posts: 35

Re: arm-eabi

linux (ubuntu)

Offline

#6 2010-02-27 12:57:12

iZsh
Contributor
Registered: 2010-01-02
Posts: 95

Re: arm-eabi

well, make sure you have your arm-eabi bin directory in your path, and you should be just fine. "make" should do just fine.

(export PATH=$PATH:/path_to_devkitarm/bin)

Offline

Board footer

Powered by FluxBB