Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2017-06-15 11:03:09

sirmixalot
Contributor
Registered: 2017-06-14
Posts: 5

Simulate MIFARE Ultralight

I'm still unclear on how to simulate an ultralight tag, I'm hoping someone can help me out.

Using the iceman fork (compiled 1.17.2017), "hf mfu eload" doesn't appear to exist.

I tried using the "hf 14a sim 2 <7-byte tag>" command. The output is:

Emulating ISO/IEC 14443 type A tag with 7 byte UID (<7-byte tag>)

Reading the tag with an ACR122U, the proxmark3 gets recognized as a MIFARE Ultralight, but with a UID of "00000000000000"

I do see the note in the iceman fork "Simulation of Ultralight/Ntag", but its not clear how to accomplish that

Thank you for your time

Offline

Board footer

Powered by FluxBB