Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2017-05-23 11:57:00

Registered: 2017-02-03
Posts: 18

how to Emulate MIFARE DESFire iso14443a type fob

Hi All,

I am trying emulate a iso14443a  DESfire key. WHen I type HF SEARCH command I get the below.

proxmark3> hf search

UID : 04 4b 0c ea 3b 38 80
ATQA : 03 44
SAK : 20 [1]
TYPE : NXP MIFARE DESFire 4k | DESFire EV1 2k/4k/8k | Plus 2k/4k SL3 | JCOP 31/41
MANUFACTURER : NXP Semiconductors Germany
ATS : 06 75 77 81 02 80 02 f0
       -  TL : length is 6 bytes
       -  T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 5 (FSC = 64)
       - TA1 : different divisors are supported, DR: [2, 4, 8], DS: [2, 4, 8]
       - TB1 : SFGI = 1 (SFGT = 8192/fc), FWI = 8 (FWT = 1048576/fc)
       - TC1 : NAD is NOT supported, CID is supported
       -  HB : 80
Answers to chinese magic backdoor commands: NO

Valid ISO14443A Tag Found - Quiting Search

for cloning it I used the command - script run mifare_autopwn
which return the error saying card cannot be detected. I tried raising the height but same result. Can someone help me with the command I can use to copy this type of key.



#2 2017-05-25 13:15:09

From: Hong Kong
Registered: 2016-10-05
Posts: 178

Re: how to Emulate MIFARE DESFire iso14443a type fob

1) what tags did you use to clone a mifare desfire card ?

2) Even given a correct blank magic uid card from my store, you probably need the 3des password to first extract the data and after which clone such a tag

3) i believe the mifare_autopwn is for mifare classic not the mifare desfire.

4) the height isn't the issue

I guess I will be the only one replying to this trend as your question is pretty wrong to start with.

You live, you learn.
You give, you take.
You win, you lose.


Board footer

Powered by FluxBB