Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-11-25 18:21:56

rev
Contributor
Registered: 2016-11-23
Posts: 4

Need some help with unknown tag

Hi I have a unknown hf tag. I've tried hf search and get nothing. I do have the reader for the tags. I have tried everything I have found on these forums and get nothing from the tag including hf 14a snoop. The only thing I have that will pick something up is when I do hf snoop. The proxmark immediately picks it up when I put the antenna between the reader and the tag.
My guess is the tag has a wake up password or something like that. I have two different traces, I think I have the raw data correctly. This is what I do

proxmark3> hf snoop 10000
#db# Skipping first 10000 sample pairs, Skipping 0 triggers.          
#db# Buffer cleared (40000 bytes)          
#db# Trigger kicked! Value: 255, Dumping Samples Hispeed now.          
#db# HF Snoop end                     
proxmark3> data sample 10000
Reading 10000 bytes from device memory

                 
         
Am I doing the snoop correctly and sampling the data correctly?

proxmark3> hw ver
[[[ Cached information ]]]
          
Prox/RFID mark3 RFID instrument          
bootrom: master/v2.2.0-264-gd1057e7-suspect 2016-11-23 06:19:27
os: master/v2.2.0-264-gd1057e7-suspect 2016-10-12 19:05:46
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/11/ 2 at  9: 8: 8
          
uC: AT91SAM7S256 Rev B          
Embedded Processor: ARM7TDMI          
Nonvolatile Program Memory Size: 256K bytes. Used: 185630 bytes (71). Free: 76514 bytes (29).          
Second Nonvolatile Program Memory Size: None          
Internal SRAM Size: 64K bytes          
Architecture Identifier: AT91SAM7Sxx Series          
Nonvolatile Program Memory Type: Embedded Flash Memory  

Here are the two trace files I have from two several different tags.

http://pastebin.com/YDdZKmkT
http://pastebin.com/ZFzcDmdv
http://pastebin.com/thDsM0BA
http://pastebin.com/fWPgX3qw

If anyone could help me out with this and point me in the right direction.

Thanks

Offline

#2 2016-12-01 04:40:37

rev
Contributor
Registered: 2016-11-23
Posts: 4

Re: Need some help with unknown tag

Ok so I have figured out what kind of card it is. It's a confidex brand. This one to be exact
http://confidex.net/products/smart-iden … -non-metal
In the spec sheets it says its a 14a. Any ideas on how to read it?

Offline

#3 2016-12-01 15:43:46

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Need some help with unknown tag

should be read normally with your hf antenna and a standard hf 14a reader command.  how is your antenna and have you tried multiple positions of the tag on the antenna (usually about 1-2 cm above the antenna is best)

Offline

Board footer

Powered by FluxBB