Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-07-29 19:50:21

HighPressure
Contributor
Registered: 2016-07-17
Posts: 56

hello from austria

Hi!

I am new to nfc & rfid
started first with an acr122u and after I liked what I saw I recently got the proxmark3 easy devkit 3 from aliexpress
works great, and after some reading here in the forum found the small problems I had with flashing the iceman fork.

hope to find some good informations and provide some stuff too smile

Offline

#2 2016-07-29 20:03:56

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: hello from austria

Welcome to the forums!


And try the latest changes in my fork, just pushed them smile

Offline

#3 2016-07-29 20:13:56

HighPressure
Contributor
Registered: 2016-07-17
Posts: 56

Re: hello from austria

ahhh wink
thanks for the work and all the support to the community wink

gonna update for sure, as I see some gcc errors on quit, exit and ctrl-c which I found only in older posts.
also some stability issues, that got better when I swapped to your fork (working with different cards during runtime, triggers them)

Offline

#4 2016-07-29 20:31:47

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: hello from austria

Ref: http://www.proxmark.org/forum/viewtopic.php?id=3036
Ref: https://hub.docker.com/r/iceman1001/proxmark3/

Yeah,  the flashing from inside a docker container has some issues but at least now its working.   The ctrl-c and mknod commands has been mentioned on both the above links.  Also watch the youtube video.

One thing still is the "data plot"  doesn't work in that docker container still.

Even if I call my fork experimental,  its more stable than PM3 master. Thanks to all coverity scan testings.

Offline

Board footer

Powered by FluxBB