Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-01-08 02:04:55

Lenox
Contributor
Registered: 2015-01-29
Posts: 42

Mesh fob

I'm trying to decode and clone this fob which is used in Mesh system.

What I did:

Checking for Unknown tags:

Using Clock:32, invert:0, Bits Found:937
PSK1 demoded bitstream:
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101
1101010111011010
0110001010100111
1111110100011111
0101101101011101

Possible unknown PSK1 Modulated Tag Found above!

Could also be PSK2 - try 'data rawdemod p2'

Could also be PSK3 - [currently not supported]

Link to trace: http://www.filedropper.com/investigated-mesh

Any idea ?

Thanks in advance!

Offline

#2 2016-05-14 09:25:47

hm
Contributor
Registered: 2016-05-13
Posts: 3

Re: Mesh fob

Similar problem with a thin card, i was told this is an IDC80 from IDTECK

Offline

Board footer

Powered by FluxBB