Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

You are not logged in.


Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-02-08 09:39:39

Registered: 2016-02-03
Posts: 5

Hitag S and proxmark3


I have a reader and a tag configured correctly and working and I'm trying to use proxmark3 to learn more about it.

Trying to snoop - give nothing.
Trying to read the Transponder  - gives "Unknown frame length: 47" (after the reader sends "0xC0")
Trying to simulate a Transponder - the reader returns after the 0xC0 and the UID 157~ bits - which is also incorrect.

I guess I am having a modulation problem or something...

The proxmark3 code supports Hitag2 but I'm trying to communicate with Hitag S technology.

Any suggestions?
Anyone have HitagS code or configurations?



Board footer

Powered by FluxBB