Proxmark3 community

eelnats

Member

Registered: 2015-08-18

Posts: 3

How to check the firmware on an out-of-the-box proxmark3

So many entries concerning firmware are qualified with stuff like "if you're running older firmware" or "most shipped boards come with this firmware..."

Can I get a quick rundown of how to see exactly what firmware my board is running before I start making any changes? I got it from a Chinese vendor that isn't all that responsive.

marshmellow

Contributor

From: US

Registered: 2013-06-10

Posts: 2,302

Re: How to check the firmware on an out-of-the-box proxmark3

hw ver     command

iceman

Administrator

Registered: 2013-04-25

Posts: 9,507

Website

Re: How to check the firmware on an out-of-the-box proxmark3

maybe we should add the "hw ver" to be run at startup of client.   or is that to make it too simple?

eelnats

Member

Registered: 2015-08-18

Posts: 3

Re: How to check the firmware on an out-of-the-box proxmark3

sh: hw: command not found

Not sure what I'm doing wrong here.

iceman

Administrator

Registered: 2013-04-25

Posts: 9,507

Website

Re: How to check the firmware on an out-of-the-box proxmark3

no,  not "sh hw"   Marshmellow wrote:  "hw ver"

All commands needs to be runned inside the PM3 client.
Start the client by:

cd client
./proxmark3 com3

if you run linux, 
"./proxmark3 /dev/ttyACM3"

Old wiki with LINUX:
https://code.google.com/p/proxmark3/wiki/Linux

NEW WIKI:
https://github.com/Proxmark/proxmark3/wiki

eelnats

Member

Registered: 2015-08-18

Posts: 3

Re: How to check the firmware on an out-of-the-box proxmark3

Perfect! I'm up and running.

Thank you both.