Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device! Remember sharing is caring. Bring something back to the community.

You are not logged in.

#1 2015-03-06 04:35:26

0xFFFF
Administrator
From: Vic - Australia
Registered: 2011-05-31
Posts: 403

Store review - proxmark3.com

Please post your buying experience here.


modhex(ecijhhhhhhhhfchdhbidhniihghdduhehvhtduhbig)

Offline

#2 2015-03-06 08:57:38

asper
Contributor
Registered: 2008-08-24
Posts: 1,408

Re: Store review - proxmark3.com

Bought there years ago without plastic case and without antennas preloaded with firmware 4xx: rock solid. It seems not to sell single parts now, only full (expensive) kits. If you need a perfect hardware it is the perfect choice.

Offline

#3 2015-03-06 22:44:44

holiman
Contributor
Registered: 2013-05-03
Posts: 566

Re: Store review - proxmark3.com

Also bought there a couple of years ago. Very expensive, also fully customs-compliant, so there was quite some tolls to pay to collect the package. The hardware has functioned perfectly.

Offline

#4 2015-03-07 00:06:41

midnitesnake
Contributor
Registered: 2012-05-11
Posts: 151

Re: Store review - proxmark3.com

Ace service, they delivered mine to a hotel while I was visiting in the states, no problems.  They have also been helpful at answers any questions about the device, and the antennas, and helped me with the maths to build my own antennas.

Also my HF PCB antenna broke, they sent me a broken one to salvage parts from - just had to pay for postage;  you may laugh but when doing demos to clients they like the professional pcbs antennas opposed to the home-made stuff!

These guys are awesome, highly recommended - also my proxmark3 has been running for some time with no concerning h/w faults now.

Offline

#5 2015-03-07 05:52:35

app_o1
Contributor
Registered: 2013-06-22
Posts: 222

Re: Store review - proxmark3.com

I also bought 2 from here. It has been 3 and 4 years. Still works perfectly well.

Offline

#6 2015-03-07 15:07:45

marshmellow
Moderator
From: US
Registered: 2013-06-10
Posts: 1,800

Re: Store review - proxmark3.com

I purchased 2 from here plus antennas.  One years ago and one recently.  Both work perfectly.  Lf PCB antenna is weak but everything functions well.

No complaints.

Offline

#7 2015-03-07 15:15:24

marshmellow
Moderator
From: US
Registered: 2013-06-10
Posts: 1,800

Re: Store review - proxmark3.com

Oh and you can still buy all the same parts as before, just have to dig through their new website a bit.  http://proxmark3.com/groups/proxmark3/

Offline

#8 2015-03-07 15:47:57

asper
Contributor
Registered: 2008-08-24
Posts: 1,408

Re: Store review - proxmark3.com

marshmellow wrote:

Oh and you can still buy all the same parts as before, just have to dig through their new website a bit.  http://proxmark3.com/groups/proxmark3/

Good! And it is quite cheaper than before !

A strange thing: Naked PM3 229 + Enclosure 29 = 259
Full enclosed PM3 = 299

What is the reason for this prices ?

Last edited by asper (2015-03-07 15:50:14)

Offline

#9 2015-03-07 16:24:42

marshmellow
Moderator
From: US
Registered: 2013-06-10
Posts: 1,800

Re: Store review - proxmark3.com

Installation?  Lol

Offline

#10 2015-05-10 17:32:34

MilkThief
Contributor
Registered: 2014-04-11
Posts: 104

Re: Store review - proxmark3.com

asper wrote:
marshmellow wrote:

Oh and you can still buy all the same parts as before, just have to dig through their new website a bit.  http://proxmark3.com/groups/proxmark3/

Good! And it is quite cheaper than before !

A strange thing: Naked PM3 229 + Enclosure 29 = 259
Full enclosed PM3 = 299

What is the reason for this prices ?

I asked for that via private mail (I was angry because I've purchased the kit for 299).
Here the answer:

The one used in the Enclosed Proxmark is manufactured in the US out of Polycarbonate (very durable). The $29 enclosure is made in China out of ABS and is not as nice.

Offline

#11 2015-05-10 17:35:14

MilkThief
Contributor
Registered: 2014-04-11
Posts: 104

Re: Store review - proxmark3.com

I purchased a PM3 kit from proxmark3.com and all was good: well packaged, ensured shipping, good manufacturing and good working.

Offline

Board footer

Powered by FluxBB