Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2008-10-24 10:47:21

edo512
Contributor
Registered: 2008-10-07
Posts: 103

B and B'

Be careful when saying "Calypso" in the 14443-B heading: cards used with the RATP in France are currently not B compliant, but are so-called B' cards: they are following the Innovatron protocol, which is close but different from B - it's actually an ancestor of the B modulation. If you put a Innovatron-compliant card on a B reader, it will not work!

My 2 cents,

Offline

#2 2008-11-02 08:11:09

rf_hack
Contributor
Registered: 2008-08-20
Posts: 16

Re: B and B'

You are right but they are in a process of switching from B' as you call it to B

A frame coding the B' is not so different than B, only the "Start of frame"  (10 bits to 0) is not here for card to reader responses. On top of this the protocol is not the same with proprietary commands

Offline

#3 2009-02-11 11:26:19

edo512
Contributor
Registered: 2008-10-07
Posts: 103

Re: B and B'

Thanks for the precisions: Does this mean that support for Innovatron should be feasible without changes in the FPGA code, but only in the ARM? In as far as the default FPGA code can support 14443-B, this is not very clear to me yet. ISO15693 is supported, ISO14443-A is supported as well, but is ISO14443-B close enough to 15693 to have both working on the proxmark at the same time?

I'd like to push a bit further into "Navigo" cards - I can pretty much read and decode all I want already on the contact side, it's not difficult, but emulating a Navigo on the Proxmark on the contactless side would be interesting...

Offline

#4 2009-07-27 16:54:29

edo512
Contributor
Registered: 2008-10-07
Posts: 103

Re: B and B'

It is a full blown microprocessor card, follows ISO7816-4 - mostly.

Offline

Board footer

Powered by FluxBB