Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-04-08 10:52:45

rolanddi
Member
Registered: 2014-04-08
Posts: 2

No answer

Hi all,

Recently I got Proxmark but can't make it work.
When I connect device I get the next log
[  166.688098] usb 7-1: new full-speed USB device number 3 using uhci_hcd
[  171.875159] usb 7-1: New USB device found, idVendor=9ac4, idProduct=4b8f
[  171.875172] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  171.875180] usb 7-1: Product: ProxMark-3 RFID Instrument
[  171.875187] usb 7-1: Manufacturer: J. Westhues
[  171.875194] usb 7-1: SerialNumber: ChangeMe
[  171.883542] hid-generic 0003:9AC4:4B8F.0003: hiddev0,hidraw2: USB HID v1.00 Device [J. Westhues ProxMark-3 RFID Instrument] on usb-0000:00:1d.2-1/input0

there are no any new devices in /dev except the next:
andy@shinai:~/pm3/client$ ls -lart
drwxr-xr-x   2 root root          80 Apr  8 12:50 usb
drwxr-xr-x  17 root root        4280 Apr  8 12:50 .
crw-------   1 root root    248,   2 Apr  8 12:50 hidraw2
drwxr-xr-x   2 root root        4120 Apr  8 12:50 char
crw-rw-rw-   1 root tty       5,   2 Apr  8 12:56 ptmx

Which device I need to connect? I tried to connect with proxmark client to /dev/ptmx
andy@shinai:~/pm3/client$ ./proxmark3 /dev/ptmx
proxmark3> hw version
proxmark3>

Thanks for help

Offline

#2 2014-04-08 11:01:49

rolanddi
Member
Registered: 2014-04-08
Posts: 2

Re: No answer

Also I tried to reflash with old flasher
andy@shinai:~/proxmark3-old/client$ ./flasher -b ~/pm3/bootrom/obj/bootrom.elf
Loading ELF file '/home/andy/pm3/bootrom/obj/bootrom.elf'...
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00000b60->0x00000b60) [RWX] @0x298

Waiting for Proxmark to appear on USB.....
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]
.
Connected units:
    1. SN:  [007/006]

Offline

#3 2014-04-08 19:49:57

midnitesnake
Contributor
Registered: 2012-05-11
Posts: 151

Re: No answer

did you remember to hold the button down?

Offline

#4 2014-04-11 11:06:28

vivat
Contributor
Registered: 2010-10-26
Posts: 332

Re: No answer

Maybe you should try with old HID interface first? Install libusb 1.0 first and try old flasher and if it doesn't help, try libusb-legacy. Or just JTAG your proxmark.

Offline

#5 2015-01-15 12:39:22

ihasseb
Member
Registered: 2015-01-15
Posts: 1

Re: No answer

Maybe you should try with old HID interface first? Install libusb 1.0 first and try old flasher........


aliiiiii

Offline

Board footer

Powered by FluxBB