Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2014-10-15 23:02:46

supertechguy
Member
Registered: 2014-10-15
Posts: 4

Unable to simulate HID card with Generic Reader and WT1 Wiegand Tester

I have generic reader, or what appears to be a generic reader, connected to a WT1 Wiegand Test Unit.

The generic reader is inside a Yale KeyMark deadbolt.

I have plans to use it as a demonstration unit at a security conference to demo the proxmark3.

All the HID cards I have work just fine with the unit, but when I read one of those cards with the Proxmark and then emulate it the reader doesn't even register that a card has been presented to it.

I have been using

lf hid fskdemod
lf hid sim [id]

At this point, Im open to any suggestions. 1413410550_img_2109.jpg

Thanks!

Offline

#2 2014-10-15 23:54:11

supertechguy
Member
Registered: 2014-10-15
Posts: 4

Re: Unable to simulate HID card with Generic Reader and WT1 Wiegand Tester

Its not generic, its definitely HID

Offline

#3 2014-10-17 03:25:58

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Unable to simulate HID card with Generic Reader and WT1 Wiegand Tester

What version firmware?

Offline

#4 2014-10-21 16:43:31

supertechguy
Member
Registered: 2014-10-15
Posts: 4

Re: Unable to simulate HID card with Generic Reader and WT1 Wiegand Tester

#db# Prox/RFID mark3 RFID instrument                 
#db# bootrom: svn 0 2014-04-01 12:12:24                 
#db# os: svn 0 2014-04-01 12:12:24                 
#db# FPGA image built on 2014/03/24 at 21:54:44

Offline

#5 2014-10-21 16:48:06

supertechguy
Member
Registered: 2014-10-15
Posts: 4

Re: Unable to simulate HID card with Generic Reader and WT1 Wiegand Tester

Also tried with this lock... Same results.

1413906443_img_2123.jpg


Works great with any reader I have ever tried that is actually installed in a building...

Offline

Board footer

Powered by FluxBB