Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2009-07-01 06:13:31

samy
Contributor
From: los angeles, california
Registered: 2009-06-18
Posts: 148
Website

Now available: Simple LF ID-based tag cloner!

Hi guys,

I've made various functions to simplify cloning existing LF tags. Unfortunately I only have a Phidgets reader and EM4102 tags to test with, so I can't really see if this would work with other tags.

Any testing and reports would be great!

Cloning tags is now simple. Just run:
loread
losim

That's it!

I've updated losim to auto-detect the clock rate of the saved tag and then convert the waveform into a bitstream ready for replay. No demodulation, clock rate specification, etc should be required.

I should get access to the google code repo shortly but until then, you can get the source from http://samy.pl/proxmark3/current/winsrc/

Once this code is checked in, I'll update this topic with more info.

Again, any success/failure reports and the type of tag (and reader) would be great.

Thanks!

Offline

Board footer

Powered by FluxBB