Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2021-04-24 17:04:26
- HyperVectra
- Contributor
- From: Sydney
- Registered: 2019-01-19
- Posts: 9
- Website
Proxmark RDV1 256kb Upgradability?
Hey,
I still have the old RDV1 and there is nothing wrong with it, I works just fine and I have it mounted how I like it...
As it only has 256k flash on the arm processor, and now that the flashrom is getting up there in size, I was wondering if there is a way to upgrade it (desolder/solder it) myself?
Shame to let this great working device slowly slide into un-usability.
Offline
#2 2021-04-25 01:49:19
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,507
- Website
Re: Proxmark RDV1 256kb Upgradability?
The RDV1 was a nice device, the upgrade RDV2 even better.
Philippe did an replacement upgrade of the chip on one of his Pm3 Easy. You should be able too if you are into soldering 
You can make a 256kb fitting fw by adapting the Makefiles in RRG/Iceman repo.
Offline