Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2021-01-18 15:55:06

lazymark2
Contributor
Registered: 2021-01-17
Posts: 2

Stuck in dumping the iclass SE card, what should I do next?

After a few days of struggling and learning, I get the latest iceman firmware and client installed. My proxmark3 now can read the iclass SE card.
lazymark2 bbcode test
hf iclass reader:
lazymark2 bbcode test
hf iclass info:
43h5bfq.jpg
hf iclass loclass -f using the iclass_dump.bin in resources, now I have got the kcus:
jeNvkCg.jpg
and a debit key
yb0ov6L.jpg
I know that I should get the dump file first, but the thing is that I don't know the AA2 keys.
Ed5FAzi.jpg

Another thing is that hf iclass sim 2 and sim 4 seems not working at all, is it related to my setting or just about the card?
tFREThh.jpg

So what I feel confused about is that:
1、Can I get the AA2 keys by only using PM3? If I must use a iclass reader to sniff or scan the card, pls tell me, then I'll just give up.
2、This card has e-purse, can I clone the card and make it work without cloning the e-purse section? (I just want to have access to the locker room, which the institution won't let interns to do)?

Last edited by lazymark2 (2021-01-18 16:19:19)

Offline

Board footer

Powered by FluxBB