Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-10-10 11:51:42

Ghost
Contributor
Registered: 2017-07-11
Posts: 7

Cannot flash PM3 EASY

Hello, i try to update firmware on my proxmark3 easy but i couldnt.
make PLATFORM=PM3OTHER
sudo make install PLATFORM=PM3OTHER

[net_client@netarchwork git]$ ./pm3-flash-bootrom   
[=] Session log /home/net_client/.proxmark3/logs/log_20201010.txt
[+] About to use the following file:
[+]    /home/net_client/prox/git/client/../bootrom/obj/bootrom.elf
[+] Waiting for Proxmark3 to appear on /dev/ttyACM0
 ?  59 found
[+] Entering bootloader...
[+] (Press and release the button only to abort)
[+] Waiting for Proxmark3 to appear on /dev/ttyACM0
 ?  49 found
[=] Available memory on this board: 256K bytes

[=] Permitted flash range: 0x00100000-0x00140000
[+] Loading ELF file /home/net_client/prox/git/client/../bootrom/obj/bootrom.elf
[+] Loading usable ELF segments:
[+]    0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
[+]    1: V 0x00200000 P 0x00100200 (0x00000d50->0x00000d50) [R X] @0x298

[+] Flashing...
[+] Writing segments for file: /home/net_client/prox/git/client/../bootrom/obj/bootrom.elf
[+]  0x00100000..0x001001ff [0x200 / 1 blocks]
. OK
[+]  0x00100200..0x00100f4f [0xd50 / 7 blocks]
....... OK

[+] All done

Have a nice day!
[net_client@netarchwork git]$ ./pm3-flash-fullimage 
[=] Session log /home/net_client/.proxmark3/logs/log_20201010.txt
[+] About to use the following file:
[+]    /home/net_client/prox/git/client/../armsrc/obj/fullimage.elf
[+] Waiting for Proxmark3 to appear on /dev/ttyACM0
 ?  59 found
[+] Entering bootloader...
[+] (Press and release the button only to abort)
[+] Waiting for Proxmark3 to appear on /dev/ttyACM0
 ?  49 found
[=] Available memory on this board: 256K bytes

[=] Permitted flash range: 0x00102000-0x00140000
[+] Loading ELF file /home/net_client/prox/git/client/../armsrc/obj/fullimage.elf
[+] Loading usable ELF segments:
[+]    0: V 0x00102000 P 0x00102000 (0x0003cc90->0x0003cc90) [R X] @0x94
[+]    1: V 0x00200000 P 0x0013ec90 (0x00001700->0x00001700) [RW ] @0x3cd24
[!!] ? Error: PHDR is not contained in Flash
[+] All done

Have a nice day!

What i do wrong? Thanx

Offline

Board footer

Powered by FluxBB