Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2020-05-23 05:59:38

emersonxr3
Contributor
Registered: 2020-03-20
Posts: 26

does not restore transaction block

I'm having trouble restoring an original mifare plus some blocks from sectors 13, 14 and 15 don't restore if any can help me I will be forever grateful.
below is some information from the tag

 pm3 --> hf search
 UID : 04 68 35 E2 8B 5C 80
ATQA : 00 44
 SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1 | 1k Ev1
MANUFACTURER : NXP Semiconductors Germany
SAK incorrectly claims that card doesn't support RATS
 ATS : 0C 75 77 80 02 C1 05 2F 2F 01 BC D6 60 D3
       -  TL : length is 12 bytes
       -  T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 5 (FSC = 64)
       - TA1 : different divisors are supported, DR: [2, 4, 8], DS: [2, 4, 8]
       - TB1 : SFGI = 0 (SFGT = (not needed) 0/fc), FWI = 8 (FWT = 1048576/fc)
       - TC1 : NAD is NOT supported, CID is supported
[=] Answers to magic commands: NO
[+] Prng detection: HARD

[+] Valid ISO14443-A Tag Found 

Offline

Board footer

Powered by FluxBB