Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2020-02-29 05:01:50

diamondrail
Contributor
Registered: 2017-08-07
Posts: 22

ISO 15693 using ISO-15693 cards from rfxsecure.com

We successfully changed the UID on the card purchased from rtxsecure.com

However, the original and magic card are still not identical.

See attached.

Does anyone know how to make these two cards identical? The IC reference given, pages, and AFI are not the same between the two cards. How to change these values so the two cards are identical?

See screenshot here: http://prntscr.com/r9c6b7

Offline

#2 2020-03-02 16:14:02

fazer
Contributor
Registered: 2019-03-02
Posts: 66

Re: ISO 15693 using ISO-15693 cards from rfxsecure.com

Hello, normally identical UID the card must accept the file of the card to clone. You must verify the number of blocks of the card to clone & your magic card, they must be identical.
Good evening.

Offline

Board footer

Powered by FluxBB